ZKYN Product Warranty & Care Guidelines
Last updated: 3 November 2026
1. Product Coverage and Warranty Period
This global limited warranty covers ZKYN Gloss and Satin paint protection film (PPF) for 10 years from the original installation date, subject to the coverage, exclusions, and care requirements below. The warranty follows the vehicle and transfers to subsequent owners for the remainder of the original 10-year warranty period.
| Product Line | Coverage Period |
| ZKYN GLOSS 60 inches / 72 inches 1.52 m / 1.83 m | 10-year limited warranty |
| ZKYN SATIN 60 inches / 72 inches 1.52 m / 1.83 m | 10-year limited warranty |
2. Scope of Warranty Coverage
ZKYN warrants the film against the following failures caused by defects in materials or manufacture during the warranty period, when installed and reasonably maintained in accordance with ZKYN instructions:
- Abnormal peeling: Loss of adhesion attributable to defective adhesive, including at edges when the cause is a material defect.
- Bubbling: Persistent bubbles caused by film or adhesive defects after installation moisture has been assessed.
- Cracking: Premature splitting or cracking of the film caused by material failure
- Delamination: Separation of the film’s layers, including defective topcoat separation.
- Yellowing and Discolouration: Premature yellowing or colour change of the product caused by manufacturing defects or natural UV exposure.
3. General Exclusions and Limitations
This warranty covers material performance only and explicitly excludes damage caused by external factors, improper maintenance, or incorrect installation. Non-covered items include:
- Installation Errors: Edge lifting due to poor wrapping, tension lines/stretch marks, fingers, contamination trapped under film, or improper squeegee pressure during application.
- Physical and Environmental Damage: Stone chips, keying, scratches penetrating through the topcoat layer, collision damage, severe hail, fire, or chemical spills (gasoline, degreaser, harsh chemicals and solvents).
- Repainted Surfaces: Application over aftermarket repainted surfaces, non-OEM paint, or damaged/peeling underlying paint finishes.
- Water Spotting and Contamination: Permanent staining caused by hard water mineral deposits, acid rain, bird droppings, or tree sap left on the film surface without timely maintenance.
- Unapproved Surface Treatments: Application of unapproved ceramic coatings, harsh solvent-based detailers, or abrasive polishing compounds over ZKYN PPF.
4. Maintenance and Owner Care Instructions
To preserve warranty eligibility, the owner must strictly adhere to the following post-installation care guidelines:
Initial Curing Period (First 7 Days)
• Gentle Cleaning During the First 7 Days: Avoid routine washing for at least 7 days after installation. If bird droppings or other contamination needs to be removed during this period, rinse with water to remove dust, then gently wipe with a clean, damp cloth. Avoid applying pressure along film edges.
• No Edge Pressure: Avoid wiping, touching, or placing force along film edges during the initial curing phase.
• Moisture Bubbles: Minor moisture pockets or slight visual haze may appear post-installation; these will evaporate naturally as the film cures.
Regular Maintenance After the First 7 Days
• Washing Guidance: Wash using pH-neutral automotive shampoo and clean microfibre mitts.
• Pressure Washer Caution: Maintain a minimum distance of 50 cm (approximately 20 inches) between the pressure washer nozzle and film edges. Avoid directing high-pressure water at film edges or into edge seams.
• Prompt Contamination Removal: Remove bird droppings, bug splatter, tree sap, and road tar immediately using warm water and pH-neutral detailers.
• Optional Ceramic Coating: Apply ZKYN Ceramic PPF or Ceramic Shield to further maintain hydrophobic performance and surface slickness.
5. Claims Procedure and Authorised Remedies
Car Owners: To make a warranty claim, contact the authorised ZKYN shop that installed the film. If that shop has closed, contact ZKYN at support@zkyn.com.
Installers: Contact the salesperson who supplied the ZKYN film as soon as possible to raise a warranty claim. If you cannot reach them or they cannot resolve the matter, contact ZKYN at support@zkyn.com.
Documentation Required:
• Original Proof of Purchase / Official Invoice.
• ZKYN Warranty Card with unique Roll ID.
• High-resolution photographs/videos clearly showing the defective area and vehicle VIN.
Remedies: Upon technical review and approval by ZKYN, ZKYN will supply replacement film for the affected panel(s). This warranty covers replacement materials only. Labour costs, including removal and reinstallation, are not covered.
6. Limitation of Liability
ZKYN’s sole liability under this Limited Warranty is strictly limited to the replacement of defective ZKYN film. In no event shall ZKYN or its authorised installers be liable for indirect, incidental, special, or consequential damages (including, but not limited to, loss of vehicle use, lost time, or commercial loss).